Skip to content Skip to sidebar Skip to footer

How To Measure For Wood Blinds


How To Measure For Wood Blinds. Installed in windows with shallow frames or to hide. 5 rows measuring the width.

How to Measure for Blinds Horizontal blinds, Wood blinds
How to Measure for Blinds Horizontal blinds, Wood blinds from www.pinterest.com

Write down the narrowest width of the 3 measurements. Wooden blinds roller blinds double roller blinds vertical blinds. Measure the exact width of the area you would like the blind to cover.

Blinds.com Recommends At Least 1.5 Of Overlap On Each Side Of The Window For Blinds And Shades, And 2 Of Overlap On Each Side For Solar Or Roller.


Use this measurement as your width. Take the narrowest of the three width measurements, and round down to the nearest 1/8. Measure exact height from the top of the proposed headrail location to the base of the sill.

Determine Where You Want The Top Of Your Blind To Be And Mark The Spot.


The top, middle and bottom of the window inside the frame. Measure the inside width at 3 places: Typically installed in windows with deep frames.

Typically Installed In Windows With Deep Frames.


Next, measure the width you want covered. Measure between the edge of your window recess and your split point mark. 5 rows measuring the width.

If There Is No Sill, Measure Below.


Measure the height from the spot you marked to the top of the window sill. Let’s start with a few general rules that apply to all of the window treatments we sell. Make a note of the narrowest.

Grab Your Tape Measure And Begin By Measuring The Width At Three Different Places:


Installed in windows with shallow frames or to hide unattractive. Installed in windows with shallow frames or to hide. To minimize light leakage we would recommend an overlap of 6cm either side & 7cm at the top of the window.


Post a Comment for "How To Measure For Wood Blinds"